| Article Index |
|---|
| Sparky |
| AutoCAD Drawings |
| Building the frame |
| Making the wheels |
| Motors |
| Encoders |
| Electronics |
| Final Assembely |
| Software |
| All Pages |
Page 8 of 9
Mount the servos by tapping a 4-40 holes in the servos places and placing the servo with the rotating shaft in front. Install the tail wheel using some wheel collars. Place some Velcro on the top of the servos and on the back of the robot. Place Velcro on the battery and on the stamp board. Install the connectors in their positions and the battery.
