| Article Index |
|---|
| Sparky |
| AutoCAD Drawings |
| Building the frame |
| Making the wheels |
| Motors |
| Encoders |
| Electronics |
| Final Assembely |
| Software |
| All Pages |
Page 7 of 9
I use the Basic stamp 2 from www.parallaxinc.com. I plan on using different processors like a pic or a Motorola processors. It will all depend on the application. For now follow the schematics to assemble the brain.
I solder some pin posts directly to the stamp board where I plug in the servos or any other modules. Here is my stamp board.
The battery I use is the Kyosho 6 Cell 1100mAh HyperFly Battery from www.towerhobbies.com. I had this helicopter laying around so I used it's battery. I used a big battery for the time. I can run this robot for a bout 3 hours no stop. But you can use any battery you like as long as you meet the specs for the stamp and the servos. (5V-9v).
